FREE SHIPPING ON ORDERS OVER $99! Details

Flaggers and traffic control workers stand closer to moving vehicles than anyone else on a job, often with their attention on the work zone instead of the traffic. Their apparel is the main thing that tells a driver a person is there. This guide covers which ANSI class is required, how day and night work differ, and how to outfit a crew.

The short answer

  • Daytime flagging and traffic control: ANSI/ISEA 107 Class 2 or Class 3.
  • Night work, high speeds or poor weather: Class 3 is the safer choice, and many agencies and contracts require it.
  • A bright shirt with no reflective tape: never enough for traffic control.

Federal traffic control standards call for high-visibility safety apparel meeting ANSI/ISEA 107 Class 2 or Class 3 for workers exposed to traffic in the right-of-way, including flaggers. States, cities and prime contractors can set stricter rules, so always check the requirements for your job.

Class 2 vs Class 3 for traffic control

Class 2 garments, usually vests and short sleeve shirts, cover the torso with fluorescent fabric and reflective tape. They suit daytime work where traffic is slower and workers can keep some distance from it.

Class 3 garments add sleeves with reflective tape, so a driver can see the full shape of a person, including arm signals. That matters most for flaggers, because your arms are how you communicate. Choose Class 3 at night, on high-speed roads and in rain or fog.

For a fuller breakdown, read ANSI Class 2 vs Class 3: which do you need?

Vest, shirt or jacket?

  • Vest: goes over anything, so it works all year. Look for pockets for a radio and paperwork. Shop safety vests, including Class 2 surveyor styles with multiple pockets.
  • Hi-vis shirt: cooler than a vest over a tee in summer, and nobody leaves it in the truck. Shop hi-vis safety shirts.
  • Jacket or hoodie: in cold weather, your outer layer must be the rated garment. A vest under a coat does nothing. Shop ANSI Class 3 outerwear.

The class is stated on each product page. Check it before you order.

Orange or green?

Both fluorescent orange-red and fluorescent yellow-green are approved colors. Pick the one that contrasts with your surroundings. Yellow-green stands out against orange cones, barrels and signs. Orange stands out against trees and grass. Our guide to hi-vis colors goes deeper.

Common mistakes on traffic control crews

  • Covering the vest with a coat. When it gets cold, switch to a rated jacket.
  • Wearing faded or dirty gear. Faded fabric and cracked tape are much harder to see. Here are 6 signs your safety gear is done.
  • One vest size for everyone. A vest that hangs open or rides up hides the tape. Order by size.
  • Printing over the reflective tape. A logo belongs on the open fabric. See our logo placement guide.

How to outfit a traffic control crew

  • One Class 2 vest per person for daytime work, plus a spare or two per truck
  • Class 3 garments for anyone flagging at night or on high-speed roads
  • A rated jacket or hoodie per person for cold months
  • Replacements on hand, since traffic control gear wears out fast

You can add your company name to any item with no minimum order. See custom logo workwear. For larger crews, quantity pricing is on our wholesale page.

Shop ANSI Class 2 apparel and ANSI Class 3 apparel.

Leave a comment

Please note, comments need to be approved before they are published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.